Physics
Can a rigid string under tension between two fixed points vibrate?
Step-by-step physics solution: Can a rigid string under tension between two fixed points vibrate?
As an Amazon Associate, I earn from qualifying purchases. For more practice problems like this, see Schaum’s Outline of College Physics, 12th Edition.
1. Restatement of the Problem in Plain Language
The student is asking a fundamental question about the physics of wave motion on strings: Can a string under very high tension (often described as “rigid” or inextensible) vibrate in transverse harmonic waves (like sines or cosines), or does high tension prevent vibration because the string cannot stretch?
To answer this, we need to examine:
- Whether real or idealized strings require stretching (elongation) to undergo transverse vibrations.
- Whether the standard wave equation allows for sine-wave solutions on strings under high tension.
- Whether geometrical constraints (like Gauss’s Theorema Egregium or minimum surfaces) invalidate the standard textbook treatment of vibrating strings.
2. Step-by-Step Derivation and Physics Analysis
Step 1: Review the Ideal Wave Equation for a String
In standard introductory and advanced physics, a string of linear mass density $\mu$ under a constant tension $T$ is considered. We analyze a small segment of the string of length $\Delta x$.
Let $y(x,t)$ be the transverse displacement of the string. The forces acting on the segment in the vertical direction are due to the tension forces acting at the endpoints, pointing along the tangents of the curved string: \(\Sigma F_y = T \sin(\theta_{x+\Delta x}) - T \sin(\theta_x)\)
For small amplitudes, the slope of the string is very small ($\theta \approx \tan\theta = \frac{\partial y}{\partial x}$), so: \(\Sigma F_y \approx T \left( \left.\frac{\partial y}{\partial x}\right|_{x+\Delta x} - \left.\frac{\partial y}{\partial x}\right|_x \right) = T \frac{\partial^2 y}{\partial x^2} \Delta x\)
Using Newton’s second law ($\Sigma F_y = (\mu \Delta x) \frac{\partial^2 y}{\partial t^2}$), we arrive at the standard linear wave equation: \(\frac{\partial^2 y}{\partial t^2} = c^2 \frac{\partial^2 y}{\partial x^2}\) where $c = \sqrt{T/\mu}$ is the wave speed.
Step 2: Address the Claim that “Strings Must Elongate as They Bend”
The premise in the prompt’s cited text claims that a string must elongate as it bends, and if tension is so high that it becomes “rigid” (inextensible), vibration stops.
- The Kinematic Reality: If a string is strictly inextensible (meaning its total arc length $L$ is strictly constant, $\Delta S = 0$), then transverse displacement does require longitudinal motion. As a point moves transversely by $y(x)$, the local stretching is given by: \(\Delta s = \int \sqrt{1 + \left(\frac{\partial y}{\partial x}\right)^2} dx \approx \int \left( 1 + \frac{1}{2}\left(\frac{\partial y}{\partial x}\right)^2 \right) dx\) For total length to remain constant, the ends of the string must either pull inward (creating longitudinal waves) or the tension must fluctuate.
- The Linearized Approximation: In standard acoustics and wave mechanics, we assume small amplitudes ($\frac{\partial y}{\partial x} \ll 1$). In this limit, the stretching term $\frac{1}{2}(\frac{\partial y}{\partial x})^2$ is second-order small ($\mathcal{O}(\epsilon^2)$), whereas the transverse displacement $y$ is first-order ($\mathcal{O}(\epsilon)$). Therefore, to first-order accuracy, transverse vibrations occur without requiring first-order stretching.
Step 3: Address Sine Waves vs. “Minimum Surfaces / Catenoids”
The prompt mentions that modes of vibration are not sine waves embedded in a plane, but rather minimum surfaces of revolution (catenoids) governed by Gauss’s Theorema Egregium.
- Gauss’s Theorema Egregium applies to intrinsic surface geometry (Gaussian curvature) of 2D surfaces embedded in 3D space. A vibrating string is a 1D curve embedded in a 2D plane (or 3D space), not a 2D surface. Thus, Theorema Egregium does not dictate the shape of a vibrating string.
- Catenoids are minimum surfaces of revolution (soap films, hanging chains under gravity). A hanging chain under gravity takes the shape of a catenary because gravity acts continuously along its length. A vibrating string under tension between two fixed points, however, is governed by inertial forces ($\mu \frac{\partial^2 y}{\partial t^2}$) balancing elastic restoring forces ($T \frac{\partial^2 y}{\partial x^2}$), not a uniform transverse body force like gravity.
- Therefore, the normal modes of a uniform string with fixed ends are strictly standing sine waves (Fourier components), mathematically proven by separating variables in the linear wave equation.
Step 4: What Happens at Extremely High Tension?
As tension $T$ increases toward infinity:
- The wave speed $c = \sqrt{T/\mu}$ approaches infinity.
- The frequencies of all harmonic modes increase ($f_n = \frac{n}{2L}\sqrt{T/\mu}$).
- The string becomes harder to deflect with a given driving force (stiffness/rigidity increases), meaning the amplitude of vibration for a given driver force decreases.
However, mathematically and physically, high tension does not forbid wave motion. It merely shifts the frequency spectrum higher and requires more energy to achieve a given displacement amplitude. If tension becomes structurally destructive (exceeding the tensile strength of the material), the string breaks—it does not transition into a non-vibrating, rigid bar of zero degrees of freedom.
3. Final Answer
Yes, a string under high tension (or an idealized rigid/inextensible string) can vibrate.
The claim that high tension (“rigidity”) prevents vibration due to elongation constraints is incorrect for small-amplitude transverse waves. To first-order approximation, transverse wave motion satisfies the linear wave equation, and its normal modes are indeed classic sine waves. Gauss’s Theorema Egregium and catenoidal minimum surfaces do not apply to vibrating 1D strings, as those concepts govern 2D surfaces and static gravitational hanging chains, respectively.
4. Common Mistakes for This Problem Type
- Confusing 1D Strings with 2D Surfaces: Applying geometric theorems meant for curved surfaces (like Gauss’s Theorema Egregium or minimal surfaces) to one-dimensional string displacement.
- Conflating Static Gravity with Dynamic Inertia: Confusing the catenary shape of a heavy rope hanging under its own weight (gravity) with the sinusoidal standing waves of a stretched string under tension (inertia vs. elasticity).
- Misinterpreting Inextensibility: Assuming that because an ideal string cannot stretch ($\Delta L = 0$), it cannot move transversely at all. In reality, transverse displacement at small angles accommodates itself via negligible second-order longitudinal adjustments or tiny tension modulations, allowing the linear wave equation to hold with high accuracy.
- Ignoring the Limit of Material Strength: Assuming tension can go to infinity without considering that real materials will snap (tensile failure) long before mathematical “rigidity” stops wave propagation.
Original question: Can a rigid string under tension between two fixed points vibrate? on Physics Stack Exchange, licensed CC BY-SA.